OwenDuffy.net 


Slope - intercept calibration constants calculator

Set intial meas_slope and meas_intercept on the form as currently used on the target, and make the Scenario 1 and Scenario 2 measurements to find the new calibration constants meas_slope and meas_intercept for the target.

It is possible to calculate new calibration constants from other intial constants, enter the actual values in the intial boxes.

Inputs:
initial meas_slope
initial meas_intercept
  Input Result
Scenario 1 (A) (B)
Scenario 2 (C) (D)
 
Results:
meas_slope
meas_intercept

The calculator does not do a lot of error checking, if you enter nonsense, it will produce nonsense. NaN means not a number, check the input values.

Changes

Version Date Description
1.01 25/02/2018 Initial.
1.02    
1.03    
1.04    
1.05    

© Copyright: Owen Duffy 1995, 2017. All rights reserved. Disclaimer.