This calculator allows calculation of Kurokawa's power reflection coefficient from Zload (or Yload or S11) and Zsource. Note:
The results are valid only for linear circuits.
The calculator does not do a lot of error checking, if you enter nonsense, it will probably produce nonsense.
Zsource is the Thevinin equivalent source impedance for Kurokawa's factors.
To use s11 values to specify the source or load, Zref must be entered.
The quantity 1/(1-|s|^2) is if you like, mismatch loss calculated using Kurokawa's power reflection coefficient |s|^2.
|1.02||25/10/2019||Revised for Kurokawa PRC.|
© Copyright: Owen Duffy 1995, 2019. All rights reserved. Disclaimer.