LED lamp failure analysis – GU10 230VAC 7W

This article is about an inexpensive GU10 230V 7W LED lamp.

Like so much inexpensive Chinese lamp product, it has not markings on the exterior or the lamp (eg voltage, current, power), but the product was sold as 7W and the box had that printed on it.

The lamp failed after less than 100h service, switching on and off intermittently symptomatic of a heat related problem.

Above is the dismantled lamp. Interestingly the LED driver PCB has “Q-3-5*1W” etched into the board, so presumably it is actually a driver for 5 series 1W white LEDs. So much for the claimed 7W, LED product performance claims are often a fraud, more so when the Chinese are involved. Continue reading LED lamp failure analysis – GU10 230VAC 7W