Roger Beep fitted to MFJ-1263 microphone / rig switch

Some years ago I purchased a used MFJ-1263 microphone / rig switch with a view to using it as an ongoing test bed for my Roger Beep module.

Implementation

The Roger Beep module was assembled with 6 way 90° single row header pins for easy connection and disconnection.

RB-MFJ1263-01The module was built, tested and adjusted for audio output level and encapsulated in clear heat shrink. The cable was made from parts from ready made 3 way RC servo jumpers with the wires removed and inserted into more suited back shells. Continue reading Roger Beep fitted to MFJ-1263 microphone / rig switch

Last update: 2nd October, 2014, 8:13 AM

End fed wires – new hams love ’em

Hams impoverished for space to erect a ‘full size’ antenna for HF pursue a range of options and end fed wires figure highly.

New hams who heard the maxim that ‘any antenna is better than no antenna at all’ will try to use bed frames, window frames, balcony railings, anything metallic to get on air. This cry for mediocrity is to prevail over a quest for understanding, ham radio as it has evolved.

The ‘net abounds with conflicting advice:

  • (Yates 2010) recommends a T50-2 powdered iron core;
  •  (VK2AVR 2014) states do not use a powdered iron toroid.. they won’t work.

They cannot both be correct. Continue reading End fed wires – new hams love ’em

Last update: 26th November, 2021, 4:57 PM

TNC-X – channel access behaviour

I have been investigating ‘lost APRS packets’, a result of many root causes.

One is a perception that when I drive in the local area, I often do not hear my own digi ‘echo’ yet I find that it did receive a packet and submit it to APRS-IS. This problem is much more apparent using a TNC-X that with any other KISS TNC in its place. Continue reading TNC-X – channel access behaviour

Last update: 4th September, 2014, 10:02 AM

Does anyone assess to their digi / iGate performance?

During recent evaluation of a range of APRS servers and TNCs, I have inspected APRS-IS records and my own server logs to identify possible anomalies caused by the equipment under test.

In that time I have found defective records caused by digi / iGates: VK2JMA-5, Vk2YGV-5, VKWUWP-2, VK2UWP-1, VK2MPJ-1,VK2ZEN-5, VK2AMW-1, VK2RHR-1, VK2LKH-1, VK2MB-1, VK2BEN-1. Continue reading Does anyone assess to their digi / iGate performance?

Last update: 3rd September, 2014, 1:19 PM

The mobile APRS W2 digi left town this morning

APRS is characterised by a lack of standards or guidance, but mostly by a lack of compliance with those standards and a lack of understanding and common sense.

VK2UWP is travelling around the countryside and from the look of it, setting up a WIDE2 digipeater in the local caravan parks without regard to its dysfunction. Continue reading The mobile APRS W2 digi left town this morning

Last update: 3rd September, 2014, 7:23 AM

The fraud of energy efficient lighting – e-ballasts

In Australia, conservationists have led a push for replacement of a range of appliances that were in good working condition for more energy efficient appliances. For this reason, some types of appliance can no longer be purchased, or serviced with spares as required.

The humble flourescent light is one of those. Although still one of our most efficient lights, rivalled only by the best of LEDs, the push is on to replace the conventional magnetic ballast flourescent T8 flourescent with T5 lights, and in the interim, T8 lights with electronic ballasts. Continue reading The fraud of energy efficient lighting – e-ballasts

Last update: 3rd February, 2015, 4:41 PM